0.8mm 7075 brushed aluminium sheet

Standard Sizes

Thickness(inch)	Thickness(mm)	Width(mm)	Length(m)	Suggested Application
0.016	0.4	914, 1000, 1219	30, 60, 90, coil or sheet	OD below 36"(914mm) insulated lines
0.020	0.5	914, 1000, 1219	30, 60, 90, coil or sheet	OD below 36"(914mm) insulated lines
0.024	0.6	914, 1000, 1219	30, 60, 90, coil or sheet	OD 36"-8′ (914mm-2.43m) insulated lines&equipment
0.032	0.8	914, 1000, 1219	30, 60, 90, coil or sheet	special applications where extra thickness and protection is required, such as fabricated tank head covers and other special fabrications
0.040	1.0	914, 1000, 1219	30, 60, 90, coil or sheet	special applications where heavy mechanical is required
0.050	1.2	914, 1000, 1219	30, 60, 90, coil or sheet	flat ducts or precipitators. Also recommended for areas subject to high wind conditions

 

Remarks: Other sizes available upon request.

Chemical Composition

Alloy	Si	Fe	Cu	Mn	Zn	Mg	Ti	Cr	Other Elements		Al
									Each	Total
1060	0.25	0.35	0.05	0.03	0.05	0.03	0.03	-	0.03		99.6min
1100	Si+Fe=0.95		0.05-0.20	0.05	0.10	-	-	-	0.05	0.15	99.0min
3003	0.6	0.7	0.05-0.20	1.0-1.50	0.10	-	-	-	0.05	0.15	reminder
3105	0.6	0.7	0.30	0.30-0.80	0.40	0.20-0.80	0.10	0.20	0.05	0.15	reminder
5005	0.3	0.7	0.20	0.20	0.25	0.50-1.10	-	-	0.05	0.15	reminder